D-Link DGS-1210 Specificatins |
|
DGS-1210-10P |
DGS-1210-28P |
DGS-1210-52MP |
Number of Ports |
- 8 10/100/1000 Mbps PoE
- 2 SFP
|
- 24 10/100/1000 Mbps PoE
- 4 SFP
|
- 48 10/100/1000 Mbps PoE
- 4 SFP
|
Port Standard & Functions |
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX (Fast Ethernet)
- IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
- IEEE 802.3x Flow Control for Full-Duplex Mode
- IEEE 802.3af compliance
- IEEE 802.3at compliance
- Auto-negotiation
|
Network Cables |
- UTP Cat. 5, Cat. 5e (100 m max.)
- EIA/TIA-568 100-ohm STP (100 m max.)
|
Full/Half Duplex |
- Full/half duplex for 10/100 Mbps speeds
- Full duplex for Gigabit speed
|
Media Interface Exchange |
Auto or configurable MDI/MDIX |
Switching Capacity |
40 Gbps |
56 Gbps |
104 Gbps |
Transmission Method |
Store-and-forward |
MAC Address Table |
16,000 entries per device |
MAC Address Update |
- Up to 256 static MAC entries
- Enable/disable auto-learning of MAC addresses
|
Maximum 64 bytes packet forwarding rate |
14.88 Mpps |
41.7 Mpps |
77.4 Mpps |
Packet Buffer Memory |
1.5 MB |
1.5 MB |
3.0 MB |
PoE Standard |
IEEE 802.3af and IEEE 802.3at |
PoE Capable Ports |
Ports 1 to 8: Up to 30 W |
Ports 1 to 4: Up to 30 W
Ports 5 to 24: Up to 15.4 W |
Ports 1 to 8: Up to 30 W
Ports 9 to 48: Up to 15.4 W |
PoE Power Budget |
Max. 78 W |
Max. 193 W |
Max. 370 W |
AC Input |
100 to 240 VAC 50/60Hz internal power supply |
Maximum Power Consumption |
103.4 W (PoE on),
17.9 W (PoE off) |
251.3 W (PoE on),
21.9 W (PoE off) |
483.1 W (PoE on),
48.9 W (PoE off) |
Standy Power Consumption |
10.3 W/110 V, 11.1 W/240 V |
24 W/110 V, 21.9 W/240 V |
29.5 W/110 V, 27.5 W/240 V |
Fan Quantity |
0 |
Two smart fans |
Three smart fans |
Acoustics |
0 dB(A) |
Low speed: 47 dB(A)
High speed: 52.4 dB(A) |
Low speed: 40.4 dB(A)
High speed: 50.1 dB(A) |
Heat Dissipation |
352.63 BTU/hr |
840.89 BTU/hr |
1648.23 BTU/hr |
Operating Temperature |
23 to 122 °F (-5 to 50 °C) |
Storage Temperature |
-4 to 158 °F (-20 to 70°C) |
Operating Humidity |
0% to 95% non-condensing |
Storage Humidity |
0% to 95% non-condensing |
Dimensions (W x D x H) |
11.02 x 7.08 x 1.73 inches (280 x 180 x 44 mm)
19” standard rack mounting width, 1U height |
17.32 x 8.27 x 1.73 inches (440 x 210 x 44 mm)
19” standard rack mounting width, 1U height |
17.32 x 16.9 x 1.73 inches (440 x 430 x 44 mm)
19” standard rack mounting width, 1U height |
Weight |
3.1 lbs (1.41 kg) |
5.60 lbs (2.54 kg) |
12.74 lbs (5.78 kg) |
Diagnostic LEDs |
- Power (per device)
- PoE Max (per Device)
- Link/Activity/Speed (per 10/100/1000Base-T port)
- Link/Activity/Speed (per SFP port)
- Fan (per device)
- Button to switch LED display mode between PoE and Link/Activity
|
MTBF |
315,336 hours |
239,236 hours |
318,616 hours |
Certifications |
- FCC Class A
- CE Class A
- ICES-003
- VCCI Class A
- C-Tick
- BSMI
|
Safety |
|
L2 Features |
- MAC Address Table
- Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
- IGMP Snooping
- IGMP v1/v2 Snooping
- Supports 256 IGMP groups
- Supports at least 64 static multicast addresses
- IGMP per VLAN
- Supports IGMP Snooping Querier
- Loopback Detection
- Spanning Tree Protocol
- 802.3ad Link Aggregetion
- DGS-1210 28/28P: Maximum of 14 groups/8 ports per group
- DGS-1210 52/52MP: Maximum of 26 groups/8 ports per group
- DGS-1210 -10/10P: Maximum of 5 groups/8 ports per group
- LLDP
- LLDP-MED
- Jumbo Frame
- Spanning Tree Protocol
- Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
- Port Mirroring
- One-to-One
- Many-to-One
- Supports Mirroring for Tx/Rx/Both
- Multicast Filtering
- Forwards all unregistered groups
- Filters all unregistered groups
- Configurable MDI/MDIX
- MLD snooping v1/v2 (256 groups)
|
VLAN |
- 802.1Q
- VLAN Group
- Max 256 static VLAN groups
- Max 4094 VIDs
- Management VLAN
- Asymmetric VLAN
- Auto Voice VLAN
- Max. 10 user defined OUI
- Max. 8 default OUI
- Auto Surveillance VLAN
|
QoS (Quality of Service) |
- 802.1p Quality of Service
- 8 Queues per port
- Queue Handling
- Strict
- Weighted Round Robin (WRR)
- Bandwidth Control
- Port-based (Ingress/Egress, min. granularity 64 Kb/s)
- QoS based on:
- 802.1p Priority Queues
- DSCP
- ToS
- IPv6 Traffic Class
- TCP/UDP port
|
L3 Features |
- IP Interface
- IPv6 Neighbor Discovery (ND)
|
Access Control List |
- Max. 50 access list
- Max. 768 rules shared by IPv4, MAC and IPv6
- Each rule can only be associated with a single port
- ACL based on
- 802.1p priority
- VLAN
- MAC address
- Ether type
- IP address
- DSCP
- Protocol type
- TCP/UDP port number
- IPv6 Traffic Class
|
Security |
- Broadcast/Multicast/Unicast Storm Control
- D-Link Safeguard Engine
- DHCP Server Screening
- IP-MAC-Port Binding (Smart Binding)
- Supports 512 address binding entries
- ARP Inspection
- ARP + IP Inspection
- Supports DHCP Snooping
- 802.1X Port-based Access Control
- ARP Spoofing Prevention
- Traffic Segmentation
- SSH v2
- SSL
- Port Security
- Supports up to 64 MAC addresses per port
- Duplicate address detection
|
AAA |
- 802.1X Authentication
- Supports local/RADIUS database
- Supports port-based access control
- Supports EAP, OTP, TLS, TTLS, PEAP
- IPv6 RADIUS Server
- Support MD5 authentication
|
OAM |
- Cable Diagnostics
- Factory Reset
|
MIB/RFC Standards |
- RFC 783 TFTP
- RFC 951 BootP/DHCP Client
- RFC 1157 SNMP v1, v2, v3
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1350 TFTP
- RFC 1493 Bridge MIB
- RFC 1769 SNTP
- RFC 1542 BootP/DHCP Client
- RFC 1901 SNMP v1, v2, v3
- RFC 1907 SNMP v2 MIB
- RFC 1908 SNMP v1, v2, v3
- RFC 2131 BootP/DHCP Client
- RFC 2138 RADIUS Authentication
- RFC 2139 RADIUS Authentication
- RFC 2233 Interface Group MIB
- RFC-2246 SSL
- RFC 2475
- RFC 2570 SNMP v1, v2, v3
- RFC 2575 SNMP v1, v2, v3
- RFC 2598 CoS
- RFC 2618 RADIUS Authentication
- RFC 2819 RMON v1
- RFC 2865 RADIUS Authentication
- RFC 3164 System Log
- RFC 3195 System Log
- RFC 3411-17 SNMP
- D-Link Private MIB
- LLDP MIB
- Zone Defense MIB
- 2233 Interface Group MIB
|
Management |
- Web-based GUI
- D-Link Network Assistant Utility
- Compact CLI
- Telnet Server
- TFTP Client
- Configurable MDI/MDIX
- SNMP
- SNMP Trap
- Backup/Upgrade firmware
- Smart Wizard
- Upload/Download Configuration file
- System Log
- BootP/DHCP Client
- SNTP
- ICMP v6
- IPv4/v6 Dual Stack
- DHCP Auto Configuration
- Time Setting
- RMONv1
- Trusted Host
|
D-Link Green 3.0 Technology |
- Power Saving by:
- Link Status
- Time-based PoE: PoE ports can be turned on/off by port or system through schedule
- LED Shutoff
- System Hibernation
- Port Shutoff
|